BMW X5: USB port
General information
Follow the information regarding the connection
of mobile devices to the USB port in the section
on USB connections.
Additional information:
USB connections.
In the center armrest
![Interior equipment](images/books/1631/index.65(6).png)
A USB port is located in the center armrest.
Properties:
- USB port Type C.
- For charging mobile devices and for data
transmission.
- Charge current: max. 3 A.
In the center console
NOTICE
Objects in the storage compartment, e.g., large
USB connectors, may block or damage the
cover when it is being opened or closed. There
is a risk of damage to property, among other
potential damage. Make sure that the area of
movement of the cover is clear while opening
and closing it.
![Interior equipment](images/books/1631/index.66(6).png)
Press onto the cover.
![Interior equipment](images/books/1631/index.67(6).png)
A USB port is located in the center console.
![Interior equipment](images/books/1631/index.68(6).png)
If the vehicle is equipped with thermo-cup holders,
a USB port is located in the center console.
Properties:
- USB port Type A.
- For charging mobile devices and for data
transmission.
- Charge current: max. 1.5 A.
READ NEXT:
Principle
The wireless charging tray enables the following
wireless functions:
Charging the rechargeable battery of a mobile
phone with Qi capability and of other mobile
devices, which support the
General information
USB ports and fixtures for attaching special accessories,
for instance coat hangers, are located
on the backrests of the front seats.
Properties of the USB ports:
USB port Type
SEE MORE:
Principle
The car's interior can be cooled or heated before
driving off with the pre-ventilation. Depending on
set temperature and ambient temperature, the
car's interior is ventilated or possibly heated using
the residual engine heat.
General information
The system can be switched on and off direct
Special tools required:
11 9 470
11 9 472
11 9 473
11 9 474
11 9 475
11 9 480
11 9 490
(cylinder bank 5 to 8)
Removal of intermediate levers is described separately from installation.
Necessary preliminary tasks:
Remove servomotor for left eccentric shaft.
Remove ignition coils on cylin