REMOVING AND INSTALLING/REPLACING OIL PRESSURE SENSOR (N52, N52K, N51,
N54, N53)
Necessary preliminary tasks:
Switch off ignition
N52, N52K, N51, N53 only:
Remove ignition coil cover.
N54 only:
Remove intake filter housing
WARNING: Scalding hazard!
Only perform this task on an engin
REMOVING AND INSTALLING/SEALING OR REPLACING TRANSMISSION SUMP
(GA6HP26Z)
IMPORTANT: Remove transmission sump only after it has cooled down.
After completion of work, check transmission oil level.
Use only the approved gear oil.
Failure to comply with this requirement will result in serious damage