BMW X5: Front Brakes
BMW X5 (G05) 2019-2026 Service & Repair Manual / Brakes / Brakes - Repair Instructions / Front Brakes
- Overview Of Front Brakes
- Removing And Installing/Replacing Both Front Brake Discs
- Removing And Installing/Replacing Left Or Right Front Brake Caliper
READ NEXT:
Overview Of Front Brakes
Fig. 17: Identifying Front Brake Components
Brake disc
Brake caliper
Brake-pad wear sensor
Brake pads
Pulse generator
Brake hose
Brake guard plate
Checking thickness of brake pad
Special to
Removing And Installing/Replacing Both Front Brake Discs
Special tools required:
34 1 280.
Necessary preliminary tasks:
Remove front wheels.
Remove and clean brake pads.
After completing work, read and comply with notes on braking in new brake
disc
Removing And Installing/Replacing Left Or Right Front Brake Caliper
IMPORTANT: The brake pad wear sensor must be replaced once it has been
removed (brake
pad wear sensor loses its retention capability in the brake pad).
Necessary preliminary tasks:
Remove wheel.
SEE MORE:
Removing And Installing/Replacing Eccentric Shaft (N52K)
Special tools required:
11 4 481
Necessary preliminary tasks:
Remove cylinder head cover
Remove intermediate lever
If necessary, move eccentric shaft (1) on twin surface to minimum lift (2).
Fig. 218: Eccentric Shaft
NOTE: All bearing caps (1 and 2) of eccentric shaft are marked with
number
Replacing A Guide Arm
NOTE: If the guide arm is detached from the rear axle carrier, it is
necessary after
reinstallation to carry out a wheel/chassis alignment check.
Necessary preliminary tasks:
Remove rear wheel.
Deactivate and empty air spring system.
Unscrew nut (1).
Remove guide arm (2) from wheel carrier.
In
© 2019-2026 Copyright www.bmwx5info.com
