BMW X5 Owners & Service Manuals

BMW X5: Android Auto preparation

Principle

Android Auto allows the operation of certain functions of a compatible smartphone via voice control and iDrive.

General information

The range of services offered depends on the country.

Functional requirements

Pairing a smartphone with Android Auto

1. "COM".

2. "Mobile devices".

3. Tilt the Controller to the right.

4. "New device".

5. "Phone calls and audio".

The vehicle's Bluetooth name is displayed on the Control Display.

6. On the mobile device, search for Bluetooth devices in the vicinity and select the vehicle.

A control number is displayed.

7. Compare the control number displayed on the Control Display with the control number on the display of the mobile device, and confirm that the two match.

8. "Use Android Auto".

9. If necessary, finish the setup on the mobile device.

The smartphone is connected to the vehicle and displayed in the device list.

Operation

For more information, refer to the Integrated Owner's Manual or the Owner's Manual for Navigation, Entertainment, Communication.

Frequently Asked Questions

All requirements are met and all required steps were completed in the specified order. Despite that, the mobile device does not function as expected.

In this case, the following explanations can help: The smartphone has already been paired with Android Auto. When a new connection is set up, Android Auto can no longer be selected.

If the steps listed have been carried out and the required function is still not available: contact Customer Relations, a dealer's service center or another qualified service center or repair shop.

READ NEXT:

 USB connection

General information The following mobile devices can be connected to the USB port: Mobile phones. Audio devices such as MP3 players. USB storage devices. Common file systems are supported. FAT32

 Opening and closing

 General information - Vehicle key

General information Depending on the equipment version, the scope of delivery includes two vehicle keys or one vehicle key and the BMW display key. Each vehicle key contains a replaceable battery. D

SEE MORE:

 Microfilter

REPLACING MICROFILTER FOR INTERIOR VENTILATION Necessary preliminary tasks: Remove microfilter housing. Unclip catches (1) and remove microfilter (2). Installation: Reset Condition Based Service display according to factory specification. Fig. 69: Identifying Catches And Microfilter REPLACING R

 Replacing Output Flange On Transfer Box At Rear (ATC 700)

IMPORTANT: After completing work, check gear oil level, see Replenishing /Changing Transfer Case Oil (ATC 700) and top up if necessary. Use only the approved gear oil in this transfer box. NOTE: Operations for removing output flange are identical to replacing radial shaft seal. Installatio

© 2019-2026 Copyright www.bmwx5info.com