BMW X5: Touchless unlocking and locking
of the vehicle - Comfort Access
			
			
			Touchless unlocking and locking
of the vehicle
Principle
The vehicle will be unlocked when the driver approaches
the locked vehicle with the vehicle key.
When the driver walks away from the unlocked
vehicle with the vehicle key, the vehicle will be
locked.
General information
The vehicle will be unlocked when an authorized
vehicle key is detected in the unlocking zone.
The unlocking zone is located within a radius of
approx. 3 ft/1 m around the door handles.
The vehicle will be locked when the vehicle key
leaves the locking zone.
The locking zone is located within a radius of approx.
7 ft/2 m around the door handles.
If the vehicle key is located in the unlocking zone
for an extended period of time without movement,
the vehicle will be locked automatically.
If a passenger is detected in the front passenger
seat during locking and the safety belt of the
front passenger is engaged in the safety belt
buckle during locking:
	- The vehicle will be locked but not secured
	against theft.
 
	- The fuel filler flap remains unlocked.
 
The behavior of the vehicle during touchless unlocking/
locking depends on the following settings:
	- If the automatic unlocking is active.
 
	- If the automatic locking is active.
 
	- If only the driver's door and the fuel filler flap
	or all access to the vehicle will be unlocked.
	Only driver's door and fuel filler flap: the driver's
	door and fuel filler flap will only be unlocked
	when the driver approaches the vehicle
	on the driver's side.
	All vehicle entry points: the vehicle will be unlocked
	regardless of the side on which the
	driver approaches the vehicle.
 
	- If the unlocking and locking of the vehicle is
	confirmed with a light signal or a sound signal.
 
	- If the welcome light is switched on when the
	vehicle is being unlocked.
 
	- If pathway lighting is activated during locking.
 
	- If the exterior mirrors are automatically folded
	out and in when the vehicle is unlocked and
	locked.
 
Functional requirements
	- The drive-ready state must be turned off.
 
	- Unlocking: when entering the unlocking zone,
	the doors and tailgate must be closed.
 
	- Locking: when leaving the locking zone, the
	doors and tailgate must be closed.
 
	- For touchless locking of the vehicle, no second
	vehicle key can be located in a radius of
	six meters around the vehicle.
 
	- If the vehicle has been in the idle state for
	several days, touchless unlocking/locking is
	not possible until after the vehicle has been
	driven.
 
Malfunction
Vehicle key detection by the vehicle may malfunction
under the following circumstances:
	- The battery of the vehicle key is discharged.
	For replacing the battery.
 
	- Fault of the radio link from transmission towers
	or other equipment with high transmitting
	power.
 
	- Shielding of the vehicle key due to metal objects.
	Do not transport the vehicle key together with
	metal objects.
 
	- Fault of the radio link from mobile phones or
	other electronic devices in direct proximity to
	the vehicle key.
	Do not carry the vehicle key in close proximity
	to other electronic devices.
 
Wet or snowy conditions may disrupt the locking
request detection on the door handles.
In the case of a malfunction, unlock and lock the
vehicle using the buttons of the vehicle key or
use the integrated key.
Additional information:
Integrated key.
READ NEXT:
	
   General information
To avoid locking the vehicle key in the vehicle,
do not place the vehicle key in the cargo area.
Depending on the vehicle equipment and country
version, it is possible to specify 
   
   
 
	
   Upper tailgate
Opening
General information
When the trailer socket is occupied, the tailgate
cannot be opened with the vehicle key or with
the button in the car's interior.
The upper tailgate will be
   
   
 
	
   Lower tailgate
Opening
General information
When open, the lower tailgate can support loads
of up to 550 lbs/250 kg.
Functional requirement
The upper tailgate must be open.
From the outside
Without Com
   
   
 
   SEE MORE:
	
   Read contents of Body, General.
Spot-weld bonding is used on this vehicle. Observe specific procedure.
Remove or cover those vehicle components in the repair area which are 
susceptible to heat or dust.
Use only approved spot-welding apparatus for repairs!
Place vehicle on straightening bench.
Fo
   
   
 
	
   Necessary preliminary tasks:
	Remove decorative strip from middle fresh-air grille.
Unlock catches (1).
Press switch (2) out of decorative strip.
Fig. 212: Pressing Switch Out Of Decorative Strip
REMOVING AND INSTALLING OR REPLACING GRIP TRIM FOR GEAR SELECTOR
SWITCH
Special tools required:
	64