BMW X5 Owners & Service Manuals

BMW X5: Guest profile - Driver profiles

BMW X5 (G05) 2019-2025 Owners Manual / Controls / Personal settings / Guest profile - Driver profiles

Guest profile

The guest profile can be activated by any driver.

Vehicle settings that are entered when the guest profile is active will be stored in the guest profile.

In the following cases the guest profile is automatically active:

The following limitations apply:

The guest profile is selected on the Welcome screen or via iDrive:

1. "CAR".

2. "Driver profiles".

As an alternative for Steps 1 and 2, the profile image can be tapped in the top status bar.

3. "Guest".

4. "OK".

Creating a driver profile

1. "CAR".

2. "Driver profiles".

3. Tilt the Controller to the right.

As an alternative for Steps 1 to 3, the profile image can be tapped in the top status bar.

4. "Add driver profile".

Non-ConnectedDrive countries: A name must be entered for the driver profile.

ConnectedDrive countries: An existing ConnectedDrive account must be assigned to a driver profile. The following options are available for this purpose:

Selecting recognition

1. "CAR".

2. "Driver profiles".

3. Tilt the Controller to the right.

As an alternative for Steps 1 to 3, the profile image can be tapped in the top status bar.

4. "Driver recognition".

5. Select the desired setting:

6. "Activate linkage".

As soon as the vehicle detects the vehicle key or the digital key, the corresponding driver profile will be activated. If the vehicle key or the smartphone with the digital key is not carried with you or not recognized, the driver profile can only be selected on the Welcome screen when a PIN has been set up.

READ NEXT:

 Setting up a PIN - Driver profiles

Setting up a PIN A driver profile with recognition cannot be activated without vehicle key and without digital key. In this case, a PIN can be set up to activate the driver profile. Countries in whic

 Renaming a driver profile - Driver profiles

Renaming a driver profile Non-ConnectedDrive countries: 1. "CAR". 2. "Driver profiles". As an alternative for Steps 1 and 2, the profile image can be tapped in the top status bar. 3. Select driver

 Connections

SEE MORE:

 Engine Diagnosis

Engine Diagnosis When attempting to diagnose driveability complaints, always consider the basics. Regardless of the level of technology employed on an engine, it still needs a few basic things to occur in order to run properly. Whether the engine is very basic or uses so-called "New Generation" te

 Side Member Cover

Read contents of Body, General. Spot-weld bonding is used on this vehicle. Observe specific procedure. Remove or cover those vehicle components in the repair area which are susceptible to heat or dust. Use only approved spot-welding apparatus for repairs! Following new body parts are required:

© 2019-2025 Copyright www.bmwx5info.com