BMW X5: Green lights - Indicator/warning lights
Green lights
Safety belt reminder for rear seats
.png)
The safety belt is buckled on
the corresponding
rear seat.
.png)
The displays may vary depending
on the
equipment version and country variant.
Turn signal
.png)
Turn signal switched on.
Unusually rapid blinking of the indicator light indicates that a turn signal bulb has failed.
Additional information: Turn signal.
Parking lights
.png)
Parking lights are switched on.
Additional information: Parking lights/low beams.
Low beams
.png)
Low beams are switched on.
Additional information: Parking lights/low beams.
Lane departure warning
.png)
The indicator light lights up:
the system
is activated. Warnings can be issued.
Additional information: Lane departure warning.
Automatic High Beam Assistant
.png)
Automatic High Beam Assistant is
switched on.
High beams are switched on and off automatically depending on the traffic situation.
Additional information: Automatic High Beam Assistant.
Automatic Hold
.png)
Automatic Hold is activated. The
vehicle
is automatically held in place when it is
stationary.
Additional information: Automatic Hold.
Manual Speed Limiter
.png)
The indicator light lights up:
the system
is switched on.
The indicator light flashes: the set speed limit has been exceeded.
Additional information: Manual Speed Limiter.
Cruise control
.png)
Indicator light is illuminated:
the system
is active.
Additional information: Cruise control.
Active Cruise Control with Stop&Go function
.png)
The indicator light lights up:
the system
is switched on.
.png)
Additional information:
Active Cruise Control with Stop&Go
function.
Speed Limit Assistant
.png)
Depending on the equipment,
indicator
light illuminates together with the icon for
a cruise control system: Speed Limit Assistant
is active and detected speed limits can be
applied manually for the displayed system.
.png)
Indicator light illuminates: the
detected
speed limit can be applied with the SET
button. As soon as the speed limit has
been applied, a green checkmark is displayed.
Additional information: Speed Limit Assistant.
Steering Assistant
.png)
Indicator light lights up: the
system supports
the driver in keeping the vehicle
within the lane.
Additional information: Steering and Lane Control Assistant.
Lane change assistant
.png)
Gray line for lane marking on
the appropriate
side: system detected a lane
change request. Lane change not currently
possible.
.png)
Arrow symbol for lane change
green: the
system carries out a lane change.
.png)
Arrow symbol for lane change
gray: lane
change not possible; functional requirements
not met.
Additional information: Lane change assistant.
Extended Traffic Jam Assistant
.png)
Indicator light is illuminated:
the system
is active.
Additional information: Assisted Driving Plus.
READ NEXT:
Blue/Gray/White lights - Indicator/warning lights
Blue lights
High beams
High beams are switched on.
Additional information:
High beams.
Drive power
Reduced drive power due to a
cold drivetrain.
Additional information:
Power gauge.
Gray lights
Acti
Fuel gauge
Principle
The current fill level of the fuel tank is displayed.
General information
Vehicle inclination may cause the display to vary.
Additional information:
Refueling.
Display
An arrow next to the
Shift lights
Principle
The Shift lights in the instrument cluster indicate
the maximum shift point at which the best possible
acceleration can be achieved.
General information
Depending on the equipment and nation
SEE MORE:
Exhaust System, Complete
REMOVING AND INSTALLING COMPLETE EXHAUST SYSTEM (N62TU)
Special tools required:
31 2 220
WARNING: Scalding hazard!
Only perform this work after engine has cooled down.
Danger of injury!
Removal of the exhaust system must be carried out with the assistance of a
second person.
Support exhaust sys
Removing And Installing / Replacing A Steering Knuckle / Wheel
Carrier
Remove rear wheel.
IMPORTANT: Expand turning lock sufficiently to avoid damaging thread
when releasing
collar nut.
Release collar nut (1), activate parking brake for this purpose.
Installation:
Replace collar nut, oil collar nut/wheel bearing contact surface only and
tighten down.
No oil permitte
