BMW X5: Danger Of Poisoning If Oil Is Ingested/Absorbed Through The Skin
Danger of poisoning!
Ingesting oil or absorbing through the skin may cause poisoning!
Possible symptoms are:
- Headaches
- Dizziness
- Stomach aches
- Vomiting
- Diarrhoea
- Cramps/fits
- Unconsciousness
Protective measures/rules of conduct:
- Pour oil only into appropriately marked containers
- Do not pour oil into drinking vessels (drinks bottles, glasses, cups or
mugs)
- Observe country-specific safety regulations
First aid measures:
- Do not induce vomiting.
If the person affected is still conscious, he/she must rinse out their mouth
with water, drink plenty of
water and consult a doctor immediately.
If the person affected is unconscious, do not administer anything by mouth,
place the person in the
recovery position and seek immediate medical attention.
RISK OF INJURY IF OIL COMES INTO CONTACT WITH EYES AND SKIN
Danger of injury!
Contact with eyes or skin may result in injury!
Possible symptoms are:
- Impaired sight
- Irritation of the eyes
- Reddening of the skin
- Rough and cracked skin
Protective measures/rules of conduct:
- Wear protective goggles
- Wear oil-resistant protective gloves
- Observe country-specific safety regulations
First aid measures:
- Eye contact: Rinse eyes immediately with plenty of water for at least 15
minutes; if available, use an eye-rinsing
bottle. If irritation of the eyes persists, consult a doctor.
- Skin contact: Wash off with soap and water immediately. If irritation
persists, consult a doctor.
NOTE: Do not use solvents/thinners.
READ NEXT:
WARNING: Danger of poisoning. See DANGER OF POISONING IF OIL IS
INGESTED/ABSORBED THROUGH THE SKIN if oil is ingested/absorbed
through the skin!
Risk of injury. See RISK OF INJURY IF OIL COMES INTO CO
IMPORTANT: After replacement, the "Repair" service function must be
carried out with in the
BMW diagnosis system.
WARNING: Danger to life!
Mount securing fixture for vehicle on lifting platform. See
SEE MORE:
Special tools required:
11 0 300
11 4 281
11 4 282
11 4 283
Necessary preliminary tasks:
Remove cylinder head cover
Remove underbody protection
Remove fastener (1) in direction of arrow.
Installation:
Install fastener (1) with bore facing outwards.
Fig. 156: Fastener
Rotate crankshaft at
Pedal Mounting Block
REMOVING AND INSTALLING (REPLACING) COMPLETE BEARING BLOCK FOR
FOOT PEDAL
Necessary preliminary tasks:
Remove pedal trim.
IMPORTANT: After completion of work, carry out function check.
Release screws (1).
Remove air duct (2).
Fig. 1: Identifying Air Duct And Screws
Disconne